Insulating Timber Garage

[Stinsy]

Balancer getting installed in IP rated joint box

Balancer model ripped off from Nowty’s recent built, IP box eBay, 32mm kopex and 1.5mm singles leftovers..

2 going in one for each bank, appreciate they can be paralleled up but I’m going one per bank

Any fuses on the lines? How stressed are you about a misidentified cable or an accidental short during installation?

[nowty]

There is no doubt that connecting up the balancer is nerve wracking, lots of tape over every exposed bit is your friend.

An instructional video here,

[AGT]

Inline fuses will be at the battery end, have ferruled each cable as I made each one and when the pcb connector is terminated to be 100 percent each cable is correct I will bell each one out as a precaution before I crimp/terminate onto the battery pack( still boxed)

Still waiting on self adhesive pcb stand off to arrive and another 16 inline fuses, plus still waiting on G99 approval…
Just a wee bit at a time due to other projects

[AGT]

Bootlace crimps onto balancer conductors and self adhesive pcb spacer turned up

[AGT]

Confirmation that my G99 has been received 30 days after sending it to them and confirming with the person at the other end, and now another 35 days to wait!