Yes I understood.
In the winter you are best turning the diverter off and putting it into the batteries and then using the cheap rate to heat the hot water. That way you don't have to put so much in the batteries so the fan won't come on as much.
Pylon Cables and advice please
Re: Pylon Cables and advice please
85no 58mm solar thermal tubes, 28.5Kw PV, 3x Sunny Island 5048, 135kWh Rolls batteries, 52kWh Growatt storage GBLI 6532, 66kWh Pylontech US3000C, 43kWh DIY, Sofar ME3000's, Brosley wood burner and 250lt DHW
Re: Pylon Cables and advice please
Yes I understood. Battery charging already has priority as there has to be >100W export to turn diverter on, so this doesn't happen until SoC is 100% anyway. Is working OK; I can see this transition taking place on the Victron perfomance plots.
No such thing as a free lunch and all low-hanging fruit picked already, unfortunately.
16 x 230W Upsolar panels S Devon, 4kW Steca, 3.9 MWh FITs/yr
8 x 405W Longi panels, 250/60 MPPT, 3.3 MWh/yr
Victron MultiPlus II-GX 48/5000/70-50
10.65 kWh Pylontec Force-L2
zappi 7kW EVCS
Villavent whole-house MVHR
5000l rainwater system
Vaillant 12kW HP
8 x 405W Longi panels, 250/60 MPPT, 3.3 MWh/yr
Victron MultiPlus II-GX 48/5000/70-50
10.65 kWh Pylontec Force-L2
zappi 7kW EVCS
Villavent whole-house MVHR
5000l rainwater system
Vaillant 12kW HP